Eave Struts

Eave Struts are intended for use along the eaves of a building and are made so that they provide:

- A vertical surface to for Wall Sheeting attachment.

- A sloped top leg that follows the roof pitch of your building, allowing for Roof Panel attachment.

- A sloped or flat bottom leg to rest on top of your framing.

Our Standard Eave Struts are referred to as Double Slope Up (DSU). Though not a stock item, Double Slope Down (DSD) eave struts are available for single slope / high side situations as well as Flat Bottomed Eave Struts. Maximum roof pitch for Double Sloped Eave Struts is 4:12.

We stock a range of lengths and roof pitches that cover most needs but custom lengths and profiles are available also.

Stock Eave Struts:

8" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 16ga. @ 20'-0" (1:12 Pitch)

8" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 16ga. @ 25'-0" (1:12 Pitch)

8" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 14ga. @ 30'-0" (1:12 Pitch)

8 1/8" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 16ga. @ 20'-0" (2:12 Pitch)

8 1/8" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 16ga. @ 25'-0" (2:12 Pitch)

8 1/8" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 14ga. @ 30'-0" (2:12 Pitch)

8 1/4" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 16ga. @ 20'-0" (3:12 Pitch)

8 1/4" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 16ga. @ 25'-0" (3:12 Pitch)

8 1/4" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 14ga. @ 30'-0" (3:12 Pitch)

8 7/16" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 16ga. @ 20'-0" (4:12 Pitch)

8 7/16" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 16ga. @ 25'-0" (4:12 Pitch)

8 7/16" (Web) x +/-3" (Top Leg) x 4" (Bottom Leg) x 14ga. @ 30'-0" (4:12 Pitch)

Note: All Stock Eave Struts are (DSU) Double Slope Up - as shown in picture.